Logo
 
HOME ABOUT US OUR PRODUCTS OUR SERVICES DISTRIBUTORS RESOURCES CONTACT US
 


Static Grounding Reels

If you need something with a longer reach or that can be permanently fixed, a static grounding reel is the right choice over an assembly.  Our line of static bonding and grounding reels are used extensively with aircraft refueling, and the loading/unloading of tank cars, storage tanks, trucks, grain silos, and chemical/fuel refineries.  The underside of all our reels are unpainted, so that you can mount the reel directly to a grounded surface, or to the conductive item that you wish to ground.

Click to learn more about Static Bonding and Grounding Best Practices.

Click any picture to see a larger image.

Heavy-Duty 

The ML2930 Series are very ruggedly constructed to withstand the toughest environments.  Their open-style design seals all the mechanical parts in an internal, gasketed chamber.  This prevents dirt and moisture on the cable from reaching the mechanical parts inside. 

A latching mechanism holds the cable at any desired length.  A slight pull on the cable releases the mechanism causing retraction.   A ball and adjustable cable stop on the cable assembly keep the cable end within easy reach.  The standard models include the LE-21C alligator clamp.
 

ML2930 Heavy-Duty Static Grounding Reel Self-Braking Auto-Rewind Reels 

Our Ametek heavy-duty static grounding/bonding reels offer steel components and a cantilever-type frame, which support the reel assembly, and are designed to function under the most adverse conditions.  Retraction need not be attended, as the retraction speed is automatically governed by a special brake assembly designed to limit the speed from two to seven feet per second.  Maintenance and repairs are made possible by bolt-together construction.  Baked-on MIL spec red finish and gasketed drum construction protect operating parts from corrosion.   Bearing surfaces are permanently lubricated.
 
  • STANDARD CLAMP:     100 amp solid copper alligator clip (LE-21C)
  • ELECTRICAL RESISTANCE:     5 ohms maximum between clamp and mounting base
  • FINISH:     Red enamel
  • SPECIAL FEATURE:     Braking system governing cable retraction speed

 PART NO.

 CABLE

 CABLE SIZE

 CABLE TYPE

 WEIGHT

 ML2930-46

 50'

 3/32" I.D. coated to 1/8" O.D.

 Clear PVC coated plated steel

 14.7 lbs

 ML2930-46YH

 50'

 3/32" I.D. coated to 5/32" O.D.

 Yellow Hytrel coated plated steel

 15.0 lbs

 ML2930-9

 75'

 3/32" I.D. coated to 1/8" O.D.

 Clear PVC coated plated steel

 17.9 lbs

 ML2930-9YH

 75'

 3/32" I.D. coated to 5/32" O.D.

 Yellow Hytrel coated plated steel

 18.2 lbs

 ML3416-7

 100'

 3/32" I.D. coated to 1/8" O.D.

 Clear PVC coated plated steel

 23.0 lbs

 ML3416-7YH

 100'

 3/32" I.D. coated to 5/32" O.D.

 Yellow Hytrel coated plated steel

 23.4 lbs

Substitute the LE21C alligator clip for our heavier duty REB clamp when using this reel in outdoor areas or with painted, dirty or rusty surfaces.  Add "REB" to the end of the part number.
 

Lind Auto-Rewind Static Grounding Reel

Auto-Rewind Reels

The Lind Equipment heavy-duty reels offer a robust, gasketed design in a lower cost, riveted construction.  Priced very reasonably, providing a viable alternative to manual rewind reels, yet offering the benefit of automatic self-retraction of the cable.  Clamps should be walked back to the reel during retraction.  These reels meet MIL-PRF A-A-50696 for use in military deployments.

  • STANDARD CLAMP:     100 amp solid copper alligator clip (LE-21C)
  • ELECTRICAL RESISTANCE:     5 ohms maximum between clamp and mounting base
  • FINISH:     Red enamel

 

PART NO.

 CABLE

 CABLE SIZE

 CABLE TYPE

 WEIGHT

 ML2930-C50

 50'

 3/32" I.D. coated to 1/8" O.D.

 Clear PVC coated plated steel

 12.0 lbs

 ML2930-Y50

 50'

 3/32" I.D. coated to 5/32" O.D.

 Yellow Hytrel coated plated steel

 12.3 lbs

 ML2930-C75

 75'

 3/32" I.D. coated to 1/8" O.D.

 Clear PVC coated plated steel

 13.5 lbs

 ML2930-Y75

 75'

 3/32" I.D. coated to 5/32" O.D.

 Yellow Hytrel coated plated steel

 13.8 lbs

 ML2930-C100

 100'

 3/32" I.D. coated to 1/8" O.D.

 Clear PVC coated plated steel

 17.0 lbs

 ML2930-Y100

 100'

 3/32" I.D. coated to 5/32" O.D.

 Yellow Hytrel coated plated steel

 17.3 lbs

 

Substitute the LE21C alligator clip for our heavier duty REB clamp when using this reel in outdoor areas or with painted, dirty or rusty surfaces.  Add "R" to the end of the part number.
 
Lind Equipment Hand-Wind Ground Reel

Hand-Wind Reels

These ruggedly constructed reels are an economical alternative to automatic retracting reels.  In addition to lower initial cost, there are fewer parts to maintain, allowing for years of trouble-free service.  ML2930 series hand-wind reels also offer highly compact storage of a wide range of cable lengths up to 150'.

  • STANDARD CLAMP:     100A solid copper alligator clip (LE-21C)
  • ELECTRICAL RESISTANCE:     5 ohms maximum between clamp and mounting base
  • FINISH:     Yellow enamel
  • CAPACITY:     125' with 5/32" O.D. cable, 150' with 1/8" O.D. cable

PART NO.

 CABLE

 CABLE SIZE

 CABLE TYPE

 WEIGHT

 ML2930-MC50

 50'

 3/32" I.D. coated to 1/8" O.D.

 Clear PVC coated plated steel

9.5 lbs

 ML2930-MY50

 50'

 3/32" I.D. coated to 5/32" O.D.

 Yellow Hytrel coated plated steel

9.8 lbs

 ML2930-MC75

 75'

 3/32" I.D. coated to 1/8" O.D.

 Clear PVC coated plated steel

10.0 lbs

 ML2930-MY75

 75'

 3/32" I.D. coated to 5/32" O.D.

 Yellow Hytrel coated plated steel

10.3 lbs

 ML2930-MC100

 100'

 3/32" I.D. coated to 1/8" O.D.

 Clear PVC coated plated steel

10.5 lbs

 ML2930-MY100

 100'

 3/32" I.D. coated to 5/32" O.D.

 Yellow Hytrel coated plated steel

10.8 lbs

 ML2930-MC125

 125'

 3/32" I.D. coated to 1/8" O.D.

 Clear PVC coated plated steel

 11.0 lbs

 ML2930-MY125

 125'

 3/32" I.D. coated to 5/32" O.D.

 Yellow Hytrel coated plated steel

 11.3 lbs

 ML2930-MC150

 150'

 3/32" I.D. coated to 1/8" O.D.

 Clear PVC coated plated steel

 11.5 lbs

 






Customized clamps and wyes for static ground reels
Substitute the LE21C alligator clip for our heavier duty REB clamp when using this reel in outdoor areas or with painted, dirty or rusty surfaces.  Add "R" to the end of the part number.


Need a different clamp?  Need a specialized wye?  We can do customized static ground reels.
 

Like our other assemblies, we have the ability to change the clamp or cable type on our reels to fit your needs.  Check out the clamp and cable alternatives, or call our sales department (877-475-LIND) to discuss specials features like wyes.

We also stock custom reels and springs from Ametek Hunter Spring.  Click here to see the full listing.

 


Industrial

200-20R Static Grounding Reel 20'700-50R Static Grounding Reel 50'

Auto-Rewind Industrial Grounding Reels 

Our industrial static grounding reels are compact and lightweight.  Their enclosed design is best suited to indoor installation, and applications where a low-cost reel is needed.
 

PART NO.

 CABLE

 CABLE SIZE

 CABLE TYPE

 CLAMP

 WEIGHT

 200-20R

 20'

 3/32" O.D.

 Plated steel

 LE-21C Alligator

3.5 lbs

 700-50R

 50'

 3/32" O.D.

 Plated steel

 LE-21C Alligator

5.5 lbs

 700-50R-NC

 50'

 1/16" I.D. coated to 3/32" O.D.

 Clear PVC coated plated steel

 LE-21C Alligator

5.5 lbs

 R-20R

 20'

 3/32" O.D.

 Plated steel

 REB Hand Clamp

 3.5 lbs

 R-50R

 50'

 3/32" O.D.

 Plated steel

 REB Hand Clamp

 5.5 lbs

 

 

 

© Copyright 2017 Lind Equipment. All Rights Reserved. | Content Management Tools by REM Web Solutions
Printer Friendly Version