Hazardous Location and Explosion-Proof Portable Lights

Hand Lamps

Our most popular hazardous location lights are our hand lamps.  Easy to handle and use, these lights have been tried and trusted in the toughest workplaces.  You can find Lind hazardous location hand lamps in refineries, military bases, aircraft hangars and anywhere where you need a light as tough as you.

XP162 Work Light 

A rugged Tuffite handle and aluminum guard make this a mainstay of the hazardous location line.  It is operable at 120V, 240V or low-voltage 12V (see below).
 
Bulb: 100W A-21 rough service bulb (included)
Light output: 1600 lumens
Construction: Tuffite phenolic handle, aluminum guard, tempered glass globe
Length: 18.5" 
Diameter: 5" 
Weight: 4 lbs. (less cable)
Approvals: cUL and UL approved for Class I, Division 1, Groups C & D

Standard models include 16/3 SOOW cord and non-explosion proof plug
XP162                 100W 120V hand lamp only.
XP162-25P         with 25 ft. cord and plug.
XP162-50P         with 50 ft. cord and plug.
XP162-100P       with 100 ft. cord and plug.

Replacement bulb: XP21 (A-21 rough service bulb)

Fluorescent bulbs generate minimal heat, making these lamps ideal for use in confined spaces.  These lights have Class 1 and 2 approvals, so they are versatile choices to use across a wide range of applications. Available in 120V, 240V (call us for information) and low-voltage 12V versions (see below).

Bulb: Fluorescent  13W twin-tube (XP87) or 26W quad-tube (XP87B)
Light output: 900 lumen (for the 13W XP87) or 1800 lumen (for the 26W XP87B).
Construction: Dupont ZYTEL outer construction is extremely rugged and leaves no exposed metal parts.  Tempered glass globe.
Length: 23"
Diameter: 4" 
Weight: 3.5 lbs. (less cable)
Approvals: cUL and UL approved for Class I, Division 1, Groups C &D, and for Class II, Division 1, Groups F & G.

Standard models Include 16/3 SOOW cord and non-explosion proof plug
XP87                 13W 120V hand lamp only.
XP87-25P         with 25 ft. cord and plug.
XP87-50P         with 50 ft. cord and plug.
XP87-100P       with 100 ft. cord and plug.
XP87B              26W 120V hand lamp only.
XP87B-25P      with 25 ft. cord and plug.
XP87B-50P      with 50 ft. cord and plug.
XP87B-100P    with 100 ft. cord and plug.

Replacement bulbs. For XP87: P/N XP874 (13W bulb).   For XP87B: P/N XP874B (26W bulb).

The XP300LED is a rechargeable LED work light that is approved for Class 1 Division 1 Groups C&D locations.  The three bright 3W LEDs can last for 7 hours on a single battery charge and illuminate a wide work area.  The battery can even be changed inside the hazardous location.  An adjustable polycarbonate lens allows the light to go from work light beam to flood light beam.  Comes complete with hanging hook, wrist strap and protective lens.  Light head pivots to put beam on exact work area.

No need for long runs of cords or expensive explosion-proof plugs, the XP300LED gives you the freedom to work confidently in hazardous locations.  Click here for more information on this light.

Bulb: Three x 3W LEDs, rated for 50,000 hours
Construction: Rugged hard plastic handle, special polycarbonate lens (resistant to MEK and MPK), aluminum heat sinks, stainless steel hanging hook, soft bumpers to provide impact protection.
Battery:  4.8V NiMH lasts 7 hours on single charge.
Length: 13" (with battery pack)
Diameter: 4.5" 
Weight: 4.3 lbs. (with battery)
Approvals: cETLus approved for Class I, Division 1, Groups C &D

XP300LED                  Light complete with one battery and charger
XP300LED-P1            Extra battery pack
XP300LED-CASE      Case with padding - will accomodate XP300LED, charger and two batteries

Low-Voltage Lights - NOT AVAILABLE IN CANADA

Sometimes explosion-proof just isn't enough to cover all the hazards of a tough workplace.  Working in a wet environment complicates the use of electricity even further.  We've found a solution by pairing our explosion-proof hand lamps with a transformer to provide safe 12V power so that nothing can stand in your way of getting the job done.  These lights are not available in Canada.

GST50 Low-Voltage Explosion-Proof Hand Lamp 

Our XP162 incandescent hand lamp with a 12V inline transformer and 50 ft. cord with plug.  Not available in Canada.

Bulb:  75W A-21 rough service bulb  (rated for up to 100W bulb)
Light output:  1430 lumens
Construction:  Tuffite phenolic handle, aluminum guard, tempered glass globe
Length: 18.5" 
Diameter: 5" 
Weight: 4 lbs. (less cable)
Approvals: cUL and UL approved for Class I, Division 1, Groups C & D  (light head only)
 

Replacement bulb: XP2112 (75W, 12V A-21 bulb)

GSFB50 Fluorescent Low-Voltage Explosion-Proof Hand Lamp 

Our quad-tube XP87B fluorescent hand lamp with a 12V inline transformer and 50 ft. cord with plug.  Not available in Canada.

Bulb:  Fluorescent  26W quad-tube
Light output:  1800 lumen
Construction:  Dupont ZYTEL outer construction is extremely rugged and leaves no exposed metal parts.  Tempered glass globe.
Length: 23"
Diameter: 4" 
Weight: 3.5 lbs. (less cable)
Approvals: cUL and UL approved for Class I, Division 1, Groups C &D, and for Class II, Division 1, Groups F & G (light head only)

Replacement bulb: XP874B

XP99 Low-Voltage Handheld Explosion-Proof Spotlight

In those wet and damp hazardous locations, you often need to get light directly on the job that you are doing rather than lighting up the area.  Tank and wet location inspections can be done more quickly with Lind on your side.

Bulb:  50W 12V halogen spot bulb (50W halogen flood bulb also available).
Construction:  Tuffite phenolic handle and aluminum guard.  Tempered glass lens.
Length: 16" 
Diameter: 5.5" 
Weight: 3 lbs. (less cable)
Approvals: CUL and UL approved for Class I Division 1 Group D areas.

XP99       50W 12V spotlight only.
GSS50    XP99 light with 120V->12V inline transformer, 50 ft. 16/3 SOOW cord.  Not available in Canada.

Replacement bulb: 2150-95

XP65 Tubular Inspection Light - Available in fluorescent and *NEW* bright LED array

The XP65's low operating temperature, narrow diameter, and lightweight design make it well suited for confined space applications.  It is extensively used in the aviation industry, especially for fuel cell and wing tank inspections.  Standard models include 16/3 SOOW cord and non-explosion proof plug.

Bulb: 8W 120V tubular fluorescent or high intensity LED array
Light output: 450 lumens
Construction:  Tuffite phenolic handle and aluminum guard
Length: 27" 
Diameter: 2.5" 
Weight: 3 lbs. (less cable) 
Approvals: CUL and UL approved for Class I Division 1 Group D and Class II Division 1 Group G areas

You can also retrofit an existing fluorescent XP65 with the LED array.  Order P/N XP65LED-P1.

String Lights

Flood Lights

Flashlight

The SabreLite by Pelican uses LED technology that produces a white beam that's as bright as an incandescent flashlight and provides 10,000 hours of lamp life and extended battery burn time.  This light is both submersible and approved for hazardous locations. 

Bulb:  Recoil LED
Light Output:  65 lumens
Construction:  Leightweight ABS resin
Length:  8.11"
Weight:  5.36oz
Approvals:  CSA certified for Class 1 Division 1 Group D areas and Class 1, Division 2 Groups ABCD and Class II Division 1 Groups F & G.

Headlight

HL-X Hazardous Location Headlight

Bring the light with you with our explosion-proof headlight.  Fitting comfortably directly on your head or on your hard hat, this light will focus on the immediate area in front of you, leaving your hands free to work.

Bulb: PR15 flashlight bulb
Construction:  Durable and chemically resistant polypropylene.
Weight with batteries: 220g (7.6oz.)
Battery:  Requires 4 AA cells. Battery burn time is approximately 6 hours with alkaline cells.
Approvals: cUL and UL approved for Class 1 Division 1 Group C & D areas.

Replacement bulb:  HL-501