NOTE: THIS WEBPAGE IS INTENDED FOR THOSE LIVING OUTSIDE OF CANADA.

DUE TO PMRA REGULATIONS, DIFFERENT UVC PRODUCTS AND CLAIMS ARE REQUIRED FOR CANADA.  IF YOU ARE A RESIDENT OF CANADA PLEASE FOLLOW THE LINK BELOW TO BE REDIRECTED TO THE PROPER WEBPAGE

Benefits of the Victory Secure UVC Locker Decontamination Retrofit Kit

• EPA Est. 96309-CAN-1

• Install this kit in any existing locker quickly to ensure its decontamination between uses

• There are kits for full lockers and kits for half lockers

• Provides safety and assurances to locker users that the space inside the locker is decontaminated

• Works when the locker is closed and becomes inactive when the locker opens to keep users safe

• Indicator LED shows when locker is safe to use (green) and when decontamination is in process (red)

• Decontaminates to 25 mJ/cm2 in 4 minutes

  • While only 10mJ/cm2 is required to kill >99.99% of SARS-CoV-2 using the Victory UVC LED Decontamination System, having a higher dose will kill a wider swath of viruses to provide broader infection control

• Easy to set up by a lay-person with easily connected cords and parts

• Rugged, durable and dependable

• No ozone or harmful chemicals produced

Details

• Contains Victory UVC LED Decontamination System - scientifically proven and effective against SARS-CoV-2

• Install the LED panels, LED indicator light, door switch and the hub box into each locker, and use the included cords to connect them all together and to the central DC power source (up to 30 panels on a single power source). Plug the DC power source into any 120V/15A outlet.

• Every Victory Secure Locker Retrofit Item Offered by Lind:

  • Each “Full-sized locker”, i.e. up to 6’ tall internal section, will require:

    • 1 x LE6713UVC-FLK Kit (contains the hub box, components, and 2 x 13W Victory UVC LED Panel)

  • Each “Half-sized locker”, i.e. up to 3’ tall internal section, will require:

    • 1 x LE6713UVC-HLK Kit (contains the hub box, components, and 1 x 13W Victory UVC LED Panel)

  • Additional Products as Needed:

    • 1 x 120V/15A Power Cord (LE6713UVC-P19) to connect the daisy-chained Victory Secure kits to an AC power source.

      • One of these is required to power the Victory Advance, but you only need one for every 50 daisy-chained Victory Advance kits. If you are setting up multiple different daisy-chained sets of lockers (e.g. for multiple rooms or distanced locker areas within a room), then you'll need one of these power cords for every set of daisy-chained lockers

• Each LE6713UVC-FLK Kit includes:

  • 2 x 13W Victory UVC LED panels

  • 1 x LED indicator light

  • 1 x Magnetic Interlock

  • 1 x Control Box (contains electronic brain, fuses, and LED driver)

    • 4 wires to connect into the locker

  • 8 x Adhesive Wire Guides

  
  

• Environmental: Indoor only, do not expose to water

• Dimensions: vary depending on deployment and locker size

Installation

• Each kit comes complete with full installation instructions.

• Installation will require some drilling into the locker walls to mount the Victory UVC LED panels, door switch, LED indicator light (optional) and hub box. Installation does not require electrical wiring as all components plug together using included connectors.

Please fill out the form below to inquire or learn more about our Victory Secure UVC Locker Decontamination Retrofit Kit